ADTRAN AOS Version R10.1.0 Command Reference Manual page 3080

Command Reference Guide
option
Use the option command to specify a generic Dynamic Host Control Protocol version 6 (DHCPv6) option
to assign to clients using this DHCPv6 pool. Use the no form of this command to remove the option from
the DHCPv6 pool. Variations of this command include:
option <number> address <ipv6 address>
option <number> ascii <string>
option <number> hex <hexbytes>
Syntax Description
<number>
address <ipv6 address>
ascii <string>
hex <hexbytes>
Default Values
By default, no DHCPv6 options are configured.
Command History
Release 18.3
Usage Examples
The following example specifies a generic DHCPv6 option for clients using this pool:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#option 35 address 2001:DB8:1::1
60000CRG0-35E
Specifies the DHCPv6 option number. Valid range is 0 to 65535.
Specifies the option value as an IPv6 address. IPv6 addresses should be
expressed in colon hexadecimal format (X:X:X:X::X). For example,
2001:DB8:1::1.
Specifies the option in simple text (ASCII) with a string of up to 256
characters.
Specifies the option value as a hexadecimal number with up to 512 digits.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3080