ADTRAN AOS Version R10.1.0 Command Reference Manual page 3241

Command Reference Guide
plc
Use the plc command to enable packet loss concealment (PLC). PLC is used to attempt to mask lost or
delayed packets by replacing the lost packet with another voice packet in the data stream. Use the no form
of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, PLC is disabled.
Command History
Release 11.1
Release 15.1
Release A2
Usage Examples
The following example disables PLC for the MGCP endpoint 1:
(config)#voice mgcp-endpoint 1
(config-mgcp-1)#no plc
60000CRG0-35E
Command was introduced.
Command was added to the Voice Line Interface.
Command was added to the Media Gateway Control Protocol (MGCP)
endpoint configuration.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3241