Table of Contents
Advertisement
Command Reference Guide
VLAN Database Command Set
abort
Use the abort command to exit the virtual local area network (VLAN) database without saving any
changes made.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this setting.
Command History
Release 5.1
Command was introduced.
Functional Notes
The abort command discards all configuration changes made since you entered the VLAN Database
Configuration mode (or since the last time you issued the apply command). The system then exits out of
this mode, returning to the enable (#) command prompt. Refer to the command
apply on page 2697
for
more information.
Usage Examples
The following example exits the VLAN database without saving the changes made:
(config)#vlan database
(vlan)#abort
Discarding all changes and exiting.
#
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2696
Advertisement
Table of Contents
