ADTRAN AOS Version R10.1.0 Command Reference Manual page 3673

Command Reference Guide
rtp packet-delay
Use the rtp packet-delay command to configure the maximum Realtime Transport Protocol (RTP) packet
delays. This command is used to set the allowable limits of latency on the network. Use the no form of this
command to return to the default value. Variations of this command include:
rtp packet-delay maximum <value>
rtp packet-delay nominal <value>
Syntax Description
maximum <value>
nominal <value>
Default Values
By default, the RTP packet delay for maximum is 100, and for nominal is 50.
Command History
Release 11.1
Release 15.1
Usage Examples
The following example configures the RTP maximum delay time on voice line sales to 200 milliseconds:
(config)#voice line sales
(config-sales)#rtp packet-delay maximum 200
60000CRG0-35E
Sets the maximum delay time value in increments of 10 milliseconds.
Range is 40 to 320 milliseconds.
Sets the nominal delay time value in increments of 10 milliseconds. Range
is 10 to 240 milliseconds.
Command was introduced.
Command was added to the Voice Line Interface.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3673