Table of Contents
Advertisement
Command Reference Guide
accept <pattern>
Use the accept command to specify numbers that users can dial. This command controls the type of
outbound calls users can place. Use the no form of this command to remove a configured dial pattern and
return to the default setting.
Syntax Description
<pattern>
Default Values
By default, the cost value is zero.
Command History
Release 9.3
Release 15.1
Functional Notes
The available wildcards for this command are:
0-9 = Match exact digit only.
M = Any digit 1 to 8.
X = Any single digit (0 to 9).
N = Any digit 2 to 9.
[123] = Any digit contained in the bracketed list.
Do not use dashes, commas, spaces, etc., inside the brackets. Commas are implied between
numbers in the brackets.
The special characters ( ), -, + are always ignored.
Examples:
1) 555-81xx matches 555-8100 to 555-8199.
2) 555-812[012] matches 555-8120 to 555-8122.
3) 1-800$ matches any 1-800 calls.
4) Nxx-xxxx matches 7 digit local.
5) 1-Nxx-Nxx-xxxx matches long distance calls in North America.
Usage Examples
The following example allows users on the line sales to dial any local number:
(config)#voice line sales
(config-sales)#accept Nxxxxxx
60000CRG0-35E
Specifies the patterns users can dial. You can enter a complete phone
number or wildcards can be used to help define accepted numbers. Refer to
Functional Notes below for more information on using wildcards.
Command was introduced.
Command was added to the Voice Line Interface.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3658
Advertisement
Table of Contents
