Table of Contents
Advertisement
Command Reference Guide
domain-name <name>
Use the domain-name command to specify a domain name suffix to be supplied to requesting Dynamic
Host Control Protocol version 6 (DHCPv6) clients served by this DHCPv6 server pool. Use the no version
of this command to remove the domain name from the pool. If the no version of this command is entered
without specifying a domain name, all domain names are removed from the pool.
Syntax Description
<name>
Default Values
By default, no domain names are specified or sent to the requesting DHCPv6 client.
Command History
Release 18.3
Functional Notes
Multiple domain names can be entered using multiple instances of this command. Each name is added or
deleted individually. Up to 50 domain names can be entered. These names are assigned in the order they
are entered. If the no version of this command is entered without specifying a domain name, all domain
names are removed from the pool.
Usage Examples
The following example adds the domain name Name1 to the DHCPv6 pool for requesting DHCPv6 clients:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#doman-name Name1
60000CRG0-35E
Specifies the domain name suffix supplied to requesting DHCPv6 clients.
Domain names are specified in ASCII text of up to 245 characters, and are
typically a domain name suffix the client uses to fully quality host names.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3073
Advertisement
Table of Contents
