ADTRAN AOS Version R10.1.0 Command Reference Manual page 3306

Command Reference Guide
match ip address prefix-list <name>
Use the match ip address prefix-list command to configure the route map to route traffic based on a
prefix list route filter. The name of the prefix list is defined with the ip prefix-list command. Refer to
prefix-list <name> description "<text>" on page 1066
command to discontinue matching.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example instructs the route map named MYMAP to match the IP address prefix list named
MYLIST:
(config)#route-map MYMAP permit 100
(config-route-map)#match ip address prefix-list MYLIST
60000CRG0-35E
Specifies matching the IP address based on the prefix list name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
for more information. Use the no form of this
Route Map Command Set
ip
3306