Tacacs+ Group Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
TACACS+ G
ROUP
The terminal access controller access control system plus (TACACS+) Group Command Set details how to
create a TACACS+ server group and how to add servers to this group. Configured groups of TACACS+
servers can be created to be used as methods for authentication, authorization, and accounting (AAA)
services in AOS. These subsets are used when defining method lists for AAA actions and can keep you
from having to specify that all configured TACACS+ servers are used for AAA.
To work with TACACS+ server groups, AAA must be enabled. Refer to the command
for more information. Any TACACS+ servers you want to add to the TACACS+ server group must
already be configured before attempting to add them to the server group. For more information about
configuring TACACS+ servers, refer to the commands
on page 1358.
TACACS+ server groups are first defined in the Global Configuration mode using the aaa group server
command. Entering this command allows you to create a group of TACACS+ servers, and then enters the
TACACS+ Group Configuration mode in order to add servers to the group. For more information about
creating a server group, refer to the command
For more information about configuring TACACS+ server groups for use with AAA, refer to the
configuration guide Configuring AAA in AOS available online at https://supportforums.adtran.com.
To activate the TACACS+ Group Configuration mode, enter the aaa group server tacacs+ <name>
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#aaa group server tacacs+ TACAuthgroup
(config-sg-tacacs+)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3362
server <hostname | ip address> on page 3363
60000CRG0-35E
C S
OMMAND ET
tacacs-server on page 1357
aaa group server on page
Copyright © 2012 ADTRAN, Inc.

TACACS+ Group Command Set

aaa on on page 889
and tacacs-server host
886.
3361