Security Monitor Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
S M
ECURITY ONITOR
The AOS security monitor feature simplifies the collection and display of network information that is
relevant to the security of the network. It provides a general overview of network security status that
allows the user to quickly and easily assess security threats and firewall status. In the AOS GUI, the
security monitor feature is called the security dashboard. For more information about configuring the
security monitor feature, refer to the Security Dashboard configuration guide (article number 3071)
available online at https://supportforums.adtran.com.
To enter the Security Monitor Configuration mode, enter the ip security monitor command at the Global
Configuration mode prompt. For example:
>enable
#configure terminal
(config)#ip security monitor
(config-secmon)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the section listed below:
cross-connect on page 67
exit on page 73
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order:
color on page 3334
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3335
stats-filter <name> on page 3336
threat on page 3337
60000CRG0-35E
C S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

Security Monitor Command Set

3333