ADTRAN AOS Version R10.1.0 Command Reference Manual page 2699

Command Reference Guide
show
Use the show command to display different aspects of the virtual local area network (VLAN)
configuration. Variations of this command include:
show changes
show changes <vlan id>
show current
show current <vlan id>
show proposed
show proposed <vlan id>
Syntax Description
<vlan id>
changes
current
proposed
Default Values
No default values are necessary for this setting.
Command History
Release 5.1
Usage Examples
The following example shows the proposed VLAN database configuration that will take effect if an apply or
exit command is issued:
(config)#vlan database
(vlan)#show proposed
60000CRG0-35E
Specifies a VLAN ID to display only information for a specific VLAN. Valid
VLAN interface ID range is from 1 to 4094.
Displays the proposed changes to the VLAN configuration.
Displays the current VLAN configuration.
Displays the proposed VLAN database. The proposed version is not part of
the running configuration until it is applied (using the apply command or the
exit command).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Database Command Set
2699