ADTRAN AOS Version R10.1.0 Command Reference Manual page 3343

Command Reference Guide
To
SIP headers can also be expressed in compact form in a SIP message. Compact forms of the header
name will match the full SIP header name.
If both the header and a match pattern are specified, the indicated SIP header must be present in the SIP
message and must contain the specified pattern for the rule to resolve as true. If only the SIP header is
specified, the SIP message must contain the specified SIP header for the rule to resolve as true.
Usage Examples
The following example specifies that the HMR rule matches SIP headers based on a specific header and
the pattern in REFER requests:
(config-rule-set-SET1)#message-rule RULE1 message-type any 5
(config-msg-rule-RULE1)#match header sip-req-uri match-value /^REFER.*/
60000CRG0-35E
Via
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
<name> (specifies
another header not listed
here)
3343