ADTRAN AOS Version R10.1.0 Command Reference Manual page 3689

Command Reference Guide
plc
Use the plc command to enable packet loss concealment (PLC). PLC is used to prevent choppy
connections by replacing a lost packet with another voice packet in the data stream. Use the no form of this
command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, PLC is enabled.
Command History
Release 11.1
Release A1
Usage Examples
The following example disables PLC for loopback 5555:
(config)#voice loopback 5555
(config-LB-5555)#no plc
60000CRG0-35E
Command was introduced.
Command was included in the Voice Loopback Account Configuration
command set.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3689