ADTRAN AOS Version R10.1.0 Command Reference Manual page 3143

Command Reference Guide
remark <remark>
Use the remark command to associate a descriptive tag with a standard Internet Protocol version 4 (IPv4)
access control list (ACL). Use the no form of this command to remove the descriptive tag.
Syntax Description
<remark>
Default Values
By default, all AOS security features are disabled, and there are no configured IPv4 ACLs.
Command History
Release 2.1
Usage Examples
The following example specifies a description for standard IPv4 ACL matchall:
(config)#ip access-list extended matchall
(config-std-nacl)#remark "allows all ip traffic from remote location"
60000CRG0-35E
Specifies a descriptive tag for the IPv4 ACL. Tags can be up to 80
alphanumeric characters enclosed in quotation marks. For example, "This
list blocks all outbound Web traffic."
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IPv4 Access Control List Command Set
3143