ADTRAN AOS Version R10.1.0 Command Reference Manual page 3007

Command Reference Guide
redistribute connected
Use the redistribute connected command to advertise routes from one protocol to another. Using the
connected keyword allows the advertisement of connected routes into the open shortest path first (OSPF)
routing protocol. This will advertise all connected routes on OSPF-enabled interfaces. It does not enable
OSPF on all interfaces. Use the no form of this command to disable the propagation of the specified route
type. Variations of this command include:
redistribute connected
redistribute connected metric <value>
redistribute connected metric-type <type>
redistribute connected route-map <name>
redistribute connected subnets
Syntax Description
metric <value>
metric-type <type>
route-map <name>
subnets
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 10.1
Release 14.1
Functional Notes
Redistributing connected routes imports those routes into OSPF without the interfaces in question actually
participating in OSPF. The connected routes imported this way are not covered by a network command
and do not send/receive OSPF traffic.
Usage Examples
The following example imports connected routes into OSPF:
(config)#router ospf
(config-ospf)#redistribute connected
60000CRG0-35E
Optional. Specifies an OSPF metric value to be assigned to connected
routes (if no other value is specified).
Optional. Specifies a type 1 or type 2 external route as the external link
type. If not specified, the default is 2.
Optional. Specifies the route map filter to use for advertising redistributed
static routes in OSPF.
Optional. Specifies subnet redistribution when redistributing routes into
OSPF.
Command was introduced.
Subcommands were added.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3007