ADTRAN AOS Version R10.1.0 Command Reference Manual page 3677

Command Reference Guide
trunk <Txx>
Use the trunk command to specify the trunk the voice line will use. Use the no form of this command to
remove a configured trunk group.
Syntax Description
<Txx>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release 15.1
Usage Examples
The following example adds trunk T02 to the voice line sales:
(config)#voice line sales
(config-sales)#trunk t02
60000CRG0-35E
Specifies an ID number for the trunk. The trunk ID is in the format Txx,
where xx is the trunk ID number. Enter a trunk ID between 1 and 99. For
example, trunk T02.
Command was introduced.
Command was added to the Voice Line Interface.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3677