Command Reference Guide
Network Monitor Probe Command Set
auth-mode open
Use the auth-mode open command to specify the authentication mode the probe must use for
communication. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, the authentication mode is open.
Command History
Release 17.2
Command was introduced.
Functional Notes
This command can only be executed while in the probe <name> twamp command set.
Usage Examples
The following example sets the authentication mode to open:
(config)#probe probe1 twamp
(config-probe-probe1)#auth-mode open
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2942