Table of Contents
Advertisement
Command Reference Guide
busy range fxo <range>
Use the busy range fxo command to set a particular set of level zero digital signals (DS0s) to busy so that
no calls are allowed inbound or outbound. If any calls are active at the time this command is issued, the
calls will stay active until either party terminates the call. Once terminated, the DS0s are set to busy. Use
the no form of this command to return to the default setting. Variations of this command include:
busy range fxo <range>
busy range fxo <range> now
Syntax Description
<range>
now
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Usage Examples
The following example sets DS0s to busy and terminates calls assigned to port range fxo 0/1 through
fxo 0/4 when the command is issued:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#busy range fxo 0/1-4 now
60000CRG0-35E
Specifies a range of ports in the format <slot/begin port range-end port
range> (for example, 0/1-4).
Optional. Terminates calls that are active at the time the command is issued
(for example, in the middle of a conversation).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3452
Advertisement
Table of Contents
