ADTRAN AOS Version R10.1.0 Command Reference Manual page 3314

Command Reference Guide
match ipv6 address prefix-list <name>
Use the match ipv6 address prefix-list command to configure the route map to route traffic based on an
Internet Protocol version 6 (IPv6) prefix list route filter. The name of the prefix list is defined with the
command ipv6 prefix-list <name> seq <number> on page
discontinue matching.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0
Usage Examples
The following example instructs the route map named MYMAP to match the IPv6 address prefix list named
MYLIST:
(config)#route-map MYMAP permit 100
(config-route-map)#match ipv6 address prefix-list MYLIST
60000CRG0-35E
Specifies matching the IPv6 address based on the IPv6 prefix list name.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
1222. Use the no form of this command to
3314