Match Dscp - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide

match dscp

Use the match dscp command to specify which traffic should be processed by this quality of service (QoS)
map based on the differentiated services code point (DSCP) value in the IP header of an Internet Protocol
version 4 (IPv4) and/or Internet Protocol version 6 (IPv6) packet. Up to eight DSCP values or identifiers,
separated by a space, may be specified in a match dscp command. Traffic matching any one of the DSCP
values qualifies as a match for the given map entry. Use the no form of this command to discontinue
matching. Variations of this command include:
match dscp <value>
match dscp <value> afxx
match dscp <value> csx
match dscp afxx
match dscp csx
match dscp default
match dscp ef
match ip dscp <value>
match ip dscp <value> afxx
match ip dscp <value> csx
match ip dscp afxx
match ip dscp csx
match ip dscp default
match ip dscp ef
match ipv6 dscp <value>
match ipv6 dscp <value> afxx
match ipv6 dscp <value> csx
match ipv6 dscp afxx
match ipv6 dscp csx
match ipv6 dscp default
match ipv6 dscp ef
Syntax Description
<value>
afxx
csx
default
ef
ip
ipv6
60000CRG0-35E
Specifies the DSCP numeric value. Valid range is 0 to 63.
Specifies the assured forwarding (AF) class and subclass. Select from:
11 (001010), 12 (001100), 13 (001110), 21 (010010), 22 (010100),
23 (010110), 31 (011010), 32 (011100), 33 (011110), 41 (100010),
42 (100100), or 43 (100110). Up to 8 DSCP values or identifiers may be
specified.
Specifies the class selector (CS) value. Valid range is 1 to 7. Up to 8 DSCP
values or identifiers may be specified.
Specifies the default DSCP value (000000).
Specifies marking for expedited forwarding (EF).
Specifies the match criteria only apply to IPv4 headers.
Specifies the match criteria only apply to IPv6 headers.
Copyright © 2012 ADTRAN, Inc.
Quality of Service Map Command Set
3278