ADTRAN AOS Version R10.1.0 Command Reference Manual page 3169

Command Reference Guide
60000CRG0-35E
neq <port number/name>
range <beginning port number/
name>
<ending port number/name> number in the specified range.
<port number>
<port name>
Copyright © 2012 ADTRAN, Inc.
IPv6 Access Control List Command Set
Matches only packets that are not equal to
the specified port number.
Matches only packets that contain a port
Specifies the port number used by TCP or
UDP to pass information to upper layers
using the following syntax: <0-65535>. All
ports below 1024 are considered well-known
ports, and are controlled by the Internet
Assigned Numbers Authority (IANA). All
ports above 1024 are dynamically assigned
ports that include registered ports for
vendor-specific applications.
The following UDP port numbers can be
specified using the associated names:
biff (Port 512)ntp (Port 123)
bootpc (Port 68)
bootps (Port 67)
discard (Port 9)
dnsix (Port 195)
domain (Port 53)
echo (Port 7)
isakmp (Port 500)
mobile-ip (Port 434)
nameserver (Port 42) tftp (Port 69)
netbios-dgm (Port 138)time (Port 37)
netbios-ns (Port 137) who (Port 513)
netbios-ss (Port 139) xdmcp (Port 177)
The following TCP port numbers can be
specified using the associated names:
bgp (Port 179)
chargen (Port 19)
cmd (Port 514)
daytime (Port 13)
discard (Port 9)
domain (Port 53)
echo (Port 7)
exec (Port 512)
finger (Port 79)
ftp (Port 21)
pim-auto-rp (Port 496)
rip (Port 520)
snmp (Port 161)
snmptrap (Port 162)
sunrpc (Port 111)
syslog (Port 514)
tacacs (Port 49)
talk (Port 517)
lpd (Port 515)
nntp (Port 119)
pim-auto-rp (Port 496)
pop2 (Port 109)
pop3 (Port 110)
smtp (Port 25)
sunrpc (Port 111)
tacacs (Port 49)
talk (Port 517)
tftp (Port 69)
3169