ADTRAN AOS Version R10.1.0 Command Reference Manual page 3010

Command Reference Guide
redistribute static
Use the redistribute static command to advertise routes from one protocol to another, regardless of the
routing protocol implemented on the routing domain. Using the static keyword allows the advertisement
of static routes into the open shortest path first (OSPF) routing protocol. This will advertise all static routes
on OSPF-enabled interfaces. It does not enable OSPF on all interfaces. Use the no form of this command
to disable the propagation of the specified route type. Variations of this command include:
redistribute static
redistribute static metric <value>
redistribute static metric-type <type>
redistribute static route-map <name>
redistribute static subnets
Syntax Description
static
metric <value>
metric-type <type>
route-map <name>
subnets
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 10.1
Release 14.1
Functional Notes
Redistributing static routes imports static routes into OSPF. Static routes imported this way are not covered
by a network command. This allows OSPF to advertise routes that are configured as static routes without
the identified network participating in OSPF.
60000CRG0-35E
Specifies advertising static routes using OSPF.
Optional. Specifies a metric value to be carried from one OSPF process to
the next (if no other value is specified).
Optional. Specifies a type 1 or type 2 external route as the external link
type. If not specified, the default is 2.
Optional. Specifies the route map filter to use for advertising redistributed
static routes in OSPF.
Optional. Specifies subnet redistribution when redistributing routes into
OSPF.
Command was introduced.
Subcommands were added.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3010