Table of Contents
Advertisement
Command Reference Guide
threat
Use the threat command to define a filter. Use the no version of this command to remove all threats from
the filter.Variations of this command include:
threat all
threat all except <id(s)>
threat add <id(s)>
threat add <id(s)> except <id(s)>
threat none
threat remove <id(s)>
threat remove <id(s)> except <id(s)>
Syntax Description
all
<id(s)>
add
except
none
remove
Default Values
No default values are necessary for this command.
Command History
Release 17.5
Functional Notes
A list of security threat IDs can be displayed using the command
security monitor stats filter is created from the global configuration mode using the command
monitor stats-filter <name> on page
Usage Examples
The following example adds all security threats to the filter:
(config-)#ip security monitor stats-filter F1
Creating new filter "F1".
(config-secmon-filter)#threat all
(config-secmon-filter)#
60000CRG0-35E
Adds all security threats to the filter.
Specifies the ID of the security threat.
Adds the specified security threats to the filter.
Optional. Specifies security threats to be exempted from the filter.
Removes all security threats from the filter.
Removes the specified security threats from the filter.
Command was introduced.
1105.
Copyright © 2012 ADTRAN, Inc.
Security Monitor Command Set
show ip security on page
610. The
ip security
3337
Advertisement
Table of Contents
