ADTRAN AOS Version R10.1.0 Command Reference Manual page 3589

Command Reference Guide
registrar primary <value>
Use the registrar primary command to define the primary Session Initiation Protocol (SIP) registrar fully
qualified domain name (FQDN) or IP address that is based on the domain naming system (DNS) suffix.
Use the no form of this command to return to the default setting. Variations of this command include:
registrar primary <value>
registrar primary <value> tcp
registrar primary <value> tcp <number>
registrar primary <value> udp
registrar primary <value> udp <number>
A secondary SIP registrar can be set using the command
page 3591.
Syntax Description
<value>
<number>
tcp
udp
Default Values
By default, the IP address is set to 0.0.0.0 and the UDP port is set to 5060.
Command History
Release 9.3
Release 15.1
Functional Notes
This command specifies which trunk will send SIP register messages. The configured value must resolve
to a valid IP address.
Usage Examples
The following example sets the registrar server to as1.adtran.com with a UDP port of 9060:
(config)#voice trunk t01 type sip
(config-t01)#registrar primary as1.adtran.com udp 9060
60000CRG0-35E
Specifies the FQDN or IP address of the registrar server. IP addresses
should be expressed in dotted decimal notation (for example, 10.10.10.1).
Optional. Specifies the port number. Range is 0 to 65535.
Optional. Sets the Transmission Control Protocol (TCP) port of the
outbound proxy server.
Optional. Sets the User Datagram Protocol (UDP) port of the outbound
proxy server.
Command was introduced.
Command was expanded.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
registrar secondary <value> on
3589