ADTRAN AOS Version R10.1.0 Command Reference Manual page 2950

Command Reference Guide
history-depth <value>
Use the history-depth command to specify the number of probe operation results allowed to be stored in
the unit's memory. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
By default, the history-depth value is set to 1.
Command History
Release 17.2
Functional Notes
This command can only be executed while in the probe <name> icmp-timestamp or
probe <name> twamp command set.
Usage Examples
The following example specifies the number of probe results that can be stored in the unit:
(config)#probe probe2 icmp-timestamp
(config-probe-probe2)#history-depth 30
60000CRG0-35E
Specifies the number of probe operation results to keep in the history
memory. The range is 1 to 120.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2950