ADTRAN AOS Version R10.1.0 Command Reference Manual page 3051

Command Reference Guide
domain-name <name>
Use the domain-name command to specify the domain name for the Dynamic Host Configuration
Protocol version 4 (DHCPv4) client. Use the no form of this command to remove the configured domain
name.
Syntax Description
<name>
Default Values
By default, there are no specified domain names.
Command History
Release 2.1
Usage Examples
The following example specifies a domain name of adtran.com:
(config)#ip dhcp pool MyPool
(config-dhcp)#domain-name adtran.com
60000CRG0-35E
Identifies the DHCPv4 client (e.g., adtran.com) using an alphanumeric
string (up to 32 characters in length).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv4 Pool Command Set
3051