ADTRAN AOS Version R10.1.0 Command Reference Manual page 3441

Command Reference Guide
trunk <Txx>
Use the trunk command to add an existing trunk to the trunk group so outbound calls may be placed out
that particular trunk as well. Use the no form of this command to remove a configured trunk group.
Syntax Description
<Txx>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example adds trunk T02 to the trunk group TestGroup:
(config)#voice grouped-trunk TestGroup
(config-TestGroup)#trunk t02
60000CRG0-35E
Specifies an ID number for the trunk. The trunk ID is in the format Txx
where xx is the trunk ID number. Enter a trunk ID between 1 and 99. For
example, trunk T02.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Trunk Group Command Set
3441