ADTRAN AOS Version R10.1.0 Command Reference Manual page 3330

Command Reference Guide
set local-preference <value>
Use the set local-preference command to restrict traffic to a local autonomous system (AS). Use the no
form of this command to cancel the local preference.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example sets the local preference for MYMAP to a value of 100:
(config)#route-map MYMAP permit 100
(config-route-map)#set local-preference 100
60000CRG0-35E
Sets the local preference value. Valid range is 0 to 4294967295.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3330