ADTRAN AOS Version R10.1.0 Command Reference Manual page 2702

Command Reference Guide
vlan <vlan id> name <name>
Use the vlan name command to assign a name to the virtual local area network (VLAN). Use the no form
of this command to remove an assigned name.
Syntax Description
<vlan id>
<name>
Default Values
By default, the assigned name is VLANxxxx; where xxxx represents four numeric digits (including leading
zeroes) equal to the VLAN ID number.
Command History
Release 5.1
Functional Notes
The name is limited to 32 characters and must be unique throughout the network.
Usage Examples
The following example sets the name of VLAN 2 to Accounting:
(config)#vlan database
(vlan)#vlan 2 name Accounting
60000CRG0-35E
Specifies a valid VLAN interface ID. Valid range is 1 to 4094.
Assigns a name to the VLAN using 1 to 32 characters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Database Command Set
2702