ADTRAN AOS Version R10.1.0 Command Reference Manual page 2955

Command Reference Guide
send-schedule periodic <value>
Use the send-schedule periodic command to specify the amount of time (in milliseconds) between
sending individual test packets during the probe. Use the no form of this command to return to the default
setting.
Syntax Description
<value>
Default Values
By default, the time interval is 20 milliseconds.
Command History
Release 17.2
Usage Examples
The following example specifies a 45 millisecond time interval between the packets during probe1 test:
(config)#probe probe1 twamp
(config-probe-probe1)#send-schedule periodic 45
60000CRG0-35E
Specifies the time interval between the individual packets. The valid range
is 5 to 5000 milliseconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2955