ADTRAN AOS Version R10.1.0 Command Reference Manual page 2783

Command Reference Guide
max-reserved-bandwidth <value>
Use the max-reserved-bandwidth command to specify the percentage of interface bandwidth reserved for
use in user-defined (priority or class-based) queues. The remainder of the interface bandwidth is reserved
for system-critical traffic and is not available to user-defined queues. Use the no form of this command to
restore the default value.
Reserving a portion of the interface bandwidth for system-critical traffic is necessary for
proper operation. Specifying the entire interface bandwidth for use in user-defined queues
can cause undesirable operation.
Syntax Description
<value>
Default Values
By default, max-reserved-bandwidth is set to 75 percent, which reserves 25 percent of the interface
bandwidth for system-critical traffic.
Command History
Release 11.1
Usage Examples
The following example specifies 85 percent of the bandwidth on the virtual local area network (VLAN) 1
interface be available for use in user-defined queues:
(config)#interface vlan 1
(config-interface-vlan 1)#max-reserved-bandwidth 85
60000CRG0-35E
Specifies the maximum percentage of bandwidth to reserve for quality of
service (QoS). This setting is configured as a percentage of the total
interface speed. Range is 1 to 100 percent.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Interface Command Set
2783