Table of Contents
Advertisement
Command Reference Guide
Voice Loopback Account Command Set
media-loopback
Use the media-loopback command to designate a voice loopback account to be used for media loopback.
Media loopback enables media sessions to be established where the media is looped back to the
transmitter. This is typically referred to as active monitoring of services. Use the no form of this command
to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, media-loopback is disabled.
Command History
Release A4.03
Command was introduced.
Usage Examples
The following example configures voice loopback account 5555 to be used for media loopback:
(config)#voice loopback 5555
(config-LB-5555)#media-loopback
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3686
Advertisement
Table of Contents
