ADTRAN AOS Version R10.1.0 Command Reference Manual page 2972

Command Reference Guide
max-sessions <value>
Use the max-sessions command to specify the number of simultaneous Two-Way Active Measurement
Protocol (TWAMP) control sessions the responder can handle. Use the no form of this command to return
to the default setting.
Syntax Description
<value>
Default Values
By default, the maximum sessions is 10.
Command History
Release 17.2
Usage Examples
The following example specifies the max-sessions value of 5:
(config)#probe responder twamp
(config-responder-twamp)#max-sessions 5
60000CRG0-35E
Specifies the maximum number of simultaneous TWAMP-control sessions.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Responder Command Set
2972