ADTRAN AOS Version R10.1.0 Command Reference Manual page 3072

Command Reference Guide
dns-server <ipv6 address>
Use the dns-server command to specify the Internet Protocol version 6 (IPv6) address of a domain naming
system (DNS) server supplied to Dynamic Host Control Protocol version 6 (DHCPv6) requesting clients
for this DHCPv6 server pool. Use the no version of this command to remove the DNS server address from
the pool. If the no version of this command is entered without specifying an IPv6 address, all DNS server
addresses are removed from the pool.
Syntax Description
<ipv6 address>
Default Values
By default, no DNS server address is specified or sent to the requesting DHCPv6 client.
Command History
Release 18.3
Functional Notes
Multiple DNS server addresses can be entered by using multiple instances of this command. Each address
is added or deleted individually. Up to 50 DNS server addresses can be entered. These addresses are
assigned in the order they are entered. If the no version of this command is entered without specifying an
IPv6 address, all DNS server addresses are removed from the DHCPv6 pool.
Usage Examples
The following example adds a DNS server address to the DHCPv6 server pool:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#dns-server 2001:DB8:1::1
60000CRG0-35E
Specifies the IPv6 address of the DNS server for requesting DHCPv6
clients. IPv6 addresses should be expressed in colon hexadecimal format
(X:X:X:X::X). For example, 20012:DB8:1::1. Up to 50 DNS server
addresses can be entered.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3072