Command Reference Guide
Route Map Command Set
set ip df
Use the set ip df command to identify the packet as don't fragment (DF). Use the no form of this command
to remove this designation.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example designates the packet as DF:
(config)#route-map MYMAP permit 100
(config-route-map)#set ip df
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3325