ADTRAN AOS Version R10.1.0 Command Reference Manual page 3600

Command Reference Guide
transfer-mode
Use the transfer-mode command to specify the behavior of the Session Initiation Protocol (SIP) trunk
when configured in a network with a Netvanta Unified Communications product. This feature determines
whether transferred calls will be controlled by the unit locally, or by the network. Use the no form of this
command to return to the default setting. Variations of this command include:
transfer-mode local
transfer-mode network
Syntax Description
local
network
Default Values
By default, the network controls call transfers.
Command History
Release A4.05
Functional Notes
When this command is issued on a specific SIP trunk, it overrides the voice transfer-mode configuration
(if previously set in the Global Configuration mode) but only applies the new configuration setting to the
SIP trunk on which it was issued. Refer to
the Global command.
Usage Examples
The following example configures the network to handle call transfers:
(config)#voice trunk t01 type sip
(config-t01)#transfer-mode network
60000CRG0-35E
Specifies that call transferring is controlled locally by the unit.
Specifies that call transferring is controlled by the network.
Command was introduced for the NetVanta 7000 Series products.
voice transfer-mode on page 1449
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
for more information on using
3600