ADTRAN AOS Version R10.1.0 Command Reference Manual page 3681

Command Reference Guide
alc
Use the alc command to enable auto level control (ALC). ALC reduces Realtime Transport Protocol (RTP)
received signals that are out of specification to the predefined levels. It is not necessary to enable ALC on
those networks that guarantee signal levels to be within specification. Use the no form of this command to
disable this feature.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 14.1
Release A1
Usage Examples
The following example activates ALC for loopback 5555:
(config)#voice loopback 5555
(config-LB-5555)#alc
60000CRG0-35E
Command was introduced.
Command was included in the Voice Loopback Account Configuration
command set.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3681