ADTRAN AOS Version R10.1.0 Command Reference Manual page 3079

Command Reference Guide
ntp domain-name <name>
Use the ntp domain-name command to specify the domain name of a Network Time Protocol (NTP)
server to be supplied to requesting Dynamic Host Control Protocol version 6 (DHCPv6) clients by this
server pool. Use the no form of this command to remove the server domain name from the pool. If no
server domain name is specified when using the no form of this command, all NTP server domain names
are removed from the pool.
Syntax Description
<name>
Default Values
By default, no NTP information is specified or sent to the DHCPv6 client.
Command History
Release 18.3
Functional Notes
Multiple NTP domain names can be entered using multiple instances of this command. Each name is
added or deleted individually. Up to 50 domain names can be entered. These names are assigned in the
order they are entered. If the no version of this command is entered without specifying a domain name, all
domain names are removed from the pool.
Usage Examples
The following example adds an NTP server domain name to the DHCPv6 pool:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#ntp domain-name Name1
60000CRG0-35E
Specifies the fully qualified domain name of an IPv6 NTP server.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3079