ADTRAN AOS Version R10.1.0 Command Reference Manual page 3397

Command Reference Guide
prefix
Use the prefix command to turn on the caller ID prefix for this ring group, causing GRP: to display in
front of the caller ID information. Use the no form of this command to turn the prefix off. Variations of
this command include:
prefix
prefix <prefix>
Syntax Description
<prefix>
Default Values
By default, no prefixes are enabled.
Command History
Release 10.1
Release A2.04
Usage Examples
The following example turns on the caller ID prefix for the operator ring group:
(config)#voice operator-group
(config-operator-group)#prefix
60000CRG0-35E
Optional. Specifies an alphanumeric outbound calling name prefix.
Maximum length is 40 characters.
Command was introduced.
Command was expanded to include the optional <prefix> parameter.
Copyright © 2012 ADTRAN, Inc.
Voice Operator Ring Group Command Set
3397