ADTRAN AOS Version R10.1.0 Command Reference Manual page 3634

Command Reference Guide
rtp frame-packetization <value>
Use the rtp frame-packetization command to configure the Realtime Transport Protocol (RTP) frame
packetization time in milliseconds for individual trunks and users. Use the no form of this command to
return to the default value.
Syntax Description
<value>
Default Values
By default, the rtp frame-packetization time is set to 20 milliseconds on all trunks and users.
Command History
Release 9.3
Usage Examples
The following example sets the frame packetization time for trunk T01 to 10 milliseconds:
(config)#voice trunk t01 type t1-rbs supervision wink role network
(config-t01)#rtp frame-packetization 10
60000CRG0-35E
Configures the RTP frame packetization time value in milliseconds. Select
from 10, 20, or 30 milliseconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3634