ADTRAN AOS Version R10.1.0 Command Reference Manual page 3344

Command Reference Guide
message-rule
Use the message-rule command from the Session Initiation Protocol (SIP) header manipulation rule
(HMR) Rule Set Configuration mode to create a message rule for the rule set, and enter the message rule's
configuration mode. This command specifies the type of messages to which the manipulation rules are
applied. Use the no form of this command to remove the message rule. Variations of this command
include:
message-rule <name>
message-rule <name> <sequence number>
message-rule <name> message-type any
message-rule <name> message-type any <sequence number>
message-rule <name> message-type request
message-rule <name> message-type request <sequence number>
message-rule <name> message-type response
message-rule <name> message-type response <sequence number>
Syntax Description
<name>
message-type any
message-type request
message-type response
<sequence number>
Default Values
By default, no message rules are configured.
Command History
Release R10.1.0
Functional Notes
A message rule is a collection of one or more header commands, which determine the types of SIP
headers to act upon, and the action to be taken. When a message rule is applied to a SIP message, all
matching header commands are processed. Message rules are processed in the order determined by the
sequence number of the message rule within the rule set. When multiple rules are applied to a message,
the results of each rule are applied before the next rule is evaluated and applied.
60000CRG0-35E
Specifies the name of the message rule. Message rule names must be
unique within the HMR rule set.
Optional. Specifies that the message rule is applied to both SIP request and
response messages.
Optional. Specifies that the message rule is applied to SIP request
messages.
Optional. Specifies that the message rule is applied to SIP response
messages.
Optional. Specifies the sequence number given to the message rule, which
determines the order in which the rules are processed. Valid sequence
number range is 1 to 99999. By default, sequence numbering occurs in
increments of 10, and all rules are processed in sequence.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
SIP HMR Command Set
3344