Table of Contents
Advertisement
Command Reference Guide
Network Monitor Probe Responder Command Set
shutdown
Use the shutdown command to disable a responder and cause it to cease operation. While a responder is
shut down, it will not respond to probe packets. Use the no form of this command to enable a responder to
respond to probe traffic.
Syntax Description
No subcommands.
Default Values
By default, probe responders are shut down when created.
Command History
Release 17.2
Command was introduced.
Usage Examples
The following example enables responder twamp:
(config)#probe responder twamp
(config-responder-twamp)#no shutdown
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2974
Advertisement
Table of Contents
