ADTRAN AOS Version R10.1.0 Command Reference Manual page 3057

Command Reference Guide
netbios-name-server
Use the netbios-name-server command to specify the primary and secondary network basic input/output
system (NetBIOS) Windows Internet Naming Service (WINS) name servers available for use by the
Dynamic Host Configuration Protocol version 4 (DHCPv4) clients. Use the no form of this command to
remove a configured NetBIOS name server. Variations of this command include:
netbios-name-server <ipv4 address>
netbios-name-server <ipv4 address> <secondary>
Syntax Description
<ipv4 address>
<secondary>
Default Values
By default, there are no configured NetBIOS WINS name servers.
Command History
Release 2.1
Usage Examples
The following example specifies a primary NetBIOS WINS name server with an IPv4 address of
172.45.6.99 and a secondary with an IPv4 address of 172.45.8.15:
(config)#ip dhcp pool MyPool
(config-dhcp)#netbios-name-server 172.45.6.99 172.45.8.15
60000CRG0-35E
Specifies the IPv4 address of the preferred NetBIOS WINS name server on
the network.
Optional. Specifies the IPv4 address of the second preferred NetBIOS
WINS name server on the network.
IPv4 addresses should be expressed in dotted decimal notation (for
example, 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv4 Pool Command Set
3057