Display Epon Statistics Interface - H3C S7500E Series Command Reference Manual

Working status: open
FEC mode : disable
Table 2-6 display epon-workmode command output description
Field
Status: open
MAC ADDR: 000f-e2a1-1027
DBA mode: internal
Working status: open
FEC mode : disable

display epon statistics interface

Syntax
display epon statistics interface interface-type interface-number
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type, which can be OLT or ONU.
interface-number: OLT/ONU port number.
Description
Use the display epon statistics interface command to display the statistics on a specified ONU/OLT
port, including average error rate of data bits or data frames of the data exchanged between the OLT
and the ONUs.
To display the statistics of an OLT, make sure the OLT is up.
To display the statistics of an ONU, make sure the ONU is online.
This command displays the average error rate, instead of the accumulated error rate, within a
sampling interval. An error rate value less than 1e-9 is displayed as 0.
Examples
# Display the statistics of an OLT port.
<Sysname> display epon statistics interface olt 3/0/1
OLT statistics:
PON Bit error rate(in 1e-9 unit): 0
The OLT is open.
The MAC address the OLT resides is 000f-e2a1-1027.
All the OLT ports under a switch use the same MAC address.
Internal DBA algorithm is adopted.
The ONU is open.
FEC is disabled
2-10
Description