Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display bgp ipv6 network command to display IPv6 routes advertised with
the network command.
Examples
# Display IPv6 routes advertised with the network command.
<Sysname> display bgp ipv6 network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network
2002::
2001::
Table 5-2 Description on the fields of the display bgp ipv6 network command
BGP Local Router ID
Local AS Number
Network
Prefix
Route-policy
Short-cut
5.1.12 display bgp ipv6 paths
Syntax
display bgp ipv6 paths [ as-regular-expression ]
View
Any view
Parameters
as-regular-expression: AS path regular expression.
Description
Use the display bgp ipv6 paths command to display IPv6 BGP path information.
If no parameter is specified, all path information will be displayed.
Mask
64
64
Field
5-10
Chapter 5 IPv6 BGP Configuration Commands
Route-policy
Description
BGP Local Router ID
Local AS Number
Network address
Prefix length
Routing policy
Shortcut route
Short-cut
Short-cut