Display Isis Interface - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
lsp-max-age:
lsp-refresh:
Interval between SPFs:
Table 4-1 Description on the fields of the display isis brief command
network-entity
is-level
cost-style
preference
Lsp-length receive
Lsp-length originate
Timers
spf-slice-size
lsp-max-age
lsp-refresh
Interval between SPFs

4.1.8 display isis interface

Syntax
display isis interface [ verbose ] [ process-id ]
View
Any view
Parameters
verbose: Displays IS-IS interface detail information.
process-id: IS-IS process ID, in the range of 1 to 65535.
Description
Use the display isis interface command to display IS-IS interface information.
The information displayed by this command includes interface name, interface IP
address, interface link state and so on. Besides all the information displayed by display
isis interface, using the display isis interface verbose command displays other
interface related information, such as CSNP packets broadcast intervals, Hello packets
broadcast intervals and the number of invalid Hello packets.
1200
900
Field
Network entity name
IS-IS Routing level
Cost style
Preference
Maximum LSP that can be received
Maximum LSP that can be generated
Timers
Time of each SPF calculation slice (0 means SPF
calculation time is not split.)
Maximum life period of LSP
Refresh period of LSP
Interval between SPF calculations
Chapter 4 IS-IS Configuration Commands
10
Description
4-8