Ppp Mp Lfi Delay-Per-Frag; Reset Ppp Compression Iphc - H3C MSR 20-20 Command Reference Manual

ppp mp lfi delay-per-frag

Syntax
View
Parameter
Description
Example

reset ppp compression iphc

Syntax
View
Parameter
Description
Example
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi
ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
Virtual template interface view, MP-group interface view, dialer interface view
time: Maximum time delay of LFI fragment in ms, in the range 1 to 1000.
Use the
ppp mp lfi delay-per-frag
for transmitting a LFI fragment.
Use the undo ppp mp lfi delay-per-frag
value, or 10 ms.
# Set the maximum time delay of LFI fragment of Virtual-Template1 to 20 ms.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi delay-per-frag 20
reset ppp compression iphc [ interface-type interface-number ]
User view
Interface-type Interface-number: Specifies an Interface by its type and number.
Use the reset ppp compression iphc
compression statistics.
If the interface-type and interface-number arguments are not specified, the IP
header compression statistics on all interfaces will be cleared.
# Reset statistics about IP header compression on all interfaces.
<Sysname> reset ppp compression iphc
command to set the maximum time delay
command to restore the default
command to delete IP header
531