Display Onu-Event Interface - H3C S7500E Series Command Reference Manual

Field
Role
State

display onu-event interface

Syntax
display onu-event interface interface-type interface-number
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type. It is ONU.
interface-number: ONU port number.
Description
Use the display onu-event interface command to display the registration and deregistration records
of an ONU.
The system supports up to 50 records for each ONU. After the number of records for an ONU
reaches this maximum number, the old records will be overwritten by the new ones.
If an ONU port is unbound from its ONU or the EPON card is reset, records will be cleared.
Examples
# Display the registration and deregistration information of the ONU.
<Sysname> display onu-event interface onu 3/0/1:1
Date Time
2007/07/28 13:57:03
2007/07/28 18:00:06
Role of the OLT port in the backup group:
MASTER: master port
SLAVE: slave port
OLT port state:
ACTIVE: The master port is active (the chip is active and the
optical module is plugged in).
READY: The slave port is ready and a master-slave switchover
can be performed.
DOWN: Any other condition.
ONU Event ONU Status
Registration Down
Deregistration Up
2-12
Description