Ppp Link Efficiency Mechanism Configuration Commands; Display Ppp Compression Iphc Rtp; Display Ppp Compression Iphc Tcp - H3C MSR 20-20 Command Reference Manual

32

display ppp compression iphc rtp

Syntax
View
Parameter
Description
Example

display ppp compression iphc tcp

Syntax
View
Parameter
Description
PPP L E
INK
C
ONFIGURATION
display ppp compression iphc rtp [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display ppp compression iphc rtp
IPHC RTP header compression.
Note that:
When IPHC RTP header compression is applied on an MP link, the compression
■
is performed on the VA (virtual access) interfaces. In this case, you can check
the compression information on MP templates, such as VT or Dialer.
When IPHC RTP header compression is applied on a normal PPP link, the
■
compression is performed on the physical link. In this case, you can check the
compression information on the physical interfaces only.
# Display statistics about IPHC RTP header compression.
<Sysname> display ppp compression iphc rtp
display ppp compression iphc tcp [ interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display ppp compression iphc tcp
about IPHC TCP header compression.
Note that:
M
FFICIENCY
C
OMMANDS
ECHANISM
command to view statistics about
command to display statistics