Link-Protocol Ppp; Ppp Account-Statistics Enable - H3C MSR 20-20 Command Reference Manual

link-protocol ppp

Syntax
View
Parameter
Description
Example

ppp account-statistics enable

Syntax
View
Parameters
Description
Examples
<Sysname> system-view
[Sysname] interface serial 1/0
[Sysname-Serial1/0] ip address ppp-negotiate
link-protocol ppp
Interface view
None
Use the link-protocol ppp
encapsulated on the interface as PPP.
By default, all interfaces except the Ethernet interface are encapsulated with PPP.
# Configure interface Serial 1/0 to encapsulate PPP.
<Sysname> system-view
[Sysname] interface serial 1/0
[Sysname-Serial1/0] link-protocol ppp
ppp account-statistics enable
undo ppp account-statistics enable
Interface view
None
Use the ppp account-statistics enable
statistics function.
Use the
undo ppp account-statistics enable
accounting statistics function.
By default, the PPP accounting statistics function is disabled.
# Enable the PPP accounting statistics function on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp account-statistics enable
command to configure the link-layer protocol
command to enable the PPP accounting
command to disable the PPP
509