Ppp Mp Mp-Group; Ppp Mp User - H3C MSR 20-20 Command Reference Manual

520 C 31: PPP
HAPTER AND

ppp mp mp-group

Syntax
View
Parameter
Description
Example

ppp mp user

Syntax
View
Parameter
Description
MP C C
ONFIGURATION OMMANDS
ppp mp mp-group number
undo ppp mp
Interface view
number: MP-group interface number, in the range 0 to 1023.
Use the
ppp mp mp-group
specified MP-group.
Use the
undo ppp mp mp-group
from the specified MP-group.
This command should be used along with the interface mp-group command.
With the two commands, you can create an MP-group interface first and then add
an interface to the MP-group. It does not matter if you reverse the two steps.
Note that only physical interfaces can be added to an MP group. Logical interfaces
such as Tunnel interfaces do not support this command.
# Add interface Serial 3/0 to MP-group 3.
<Sysname> system-view
[Sysname] interface serial 3/0
[Sysname-Serial3/0] ppp mp mp-group 3
ppp mp user username bind virtual-template number
undo ppp mp user username
System view
username: User name, a string of 1 to 80 characters.
virtual-template number: Specifies a virtual-template. The number argument is
in the range of 0 to 1023.
Use the
ppp mp user
Use the
undo ppp mp user
In establishing a PPP connection, after PPP authentication succeeds, if a
virtual-template is specified, MP will be bound based on the parameters of the
virtual-template and a new virtual interface will be formed to transfer data.
command to add the current interface to the
command to remove the current interface
command to bind an MP user to a virtual template.
command to remove the specified binding.